HOT & COLD WATER DISPENSER WITH BUILT IN RO SYSTEM

This is an ideal combination of Five Stage RO system & Water Dispenser suitable for office/home use.

Specifications:

1.Five Level Purification Process: (Assuming Inlet water TDS < 1200 ppm)

(RO SYSTEM)

Level 1: 5 micron-spun filter, removes the Physical & Suspended Impurities such as Sand, Silt, Dust, Rust, Hair etc.
Level 2: Granular Activated Carbon (GAC) removes the colour & free chlorine in the water and also absorbs the Organic impurities on its surface.

Level 3: Activated Block Carbon, is a protective mechanism to safeguard the highly sensitive RO membrane.
Level 4: This is the most advanced Thin Film Composite Reverse Osmosis Membrane designed to remove dissolved impurities.
 
Level 5: Post Carbon cum Water Polisher, is Silver impregnated activated carbon filter to prevent the growth of bacteria at the point of use and to restore the natural taste of water.

• System Recovery: 20 to 30 %
• Salt Rejection: 90 – 95 % of the inlet TDS

2. HOT & COLD WATER DISPENSER: (With extra 8 Ltr. Jar & 4 Gallon Hydropnuematic Storage tank)

2 Stage Food Grade Tank i) Chilled water storage --3.5 Ltr.
(Total storage – 5Ltrs.) ii) Hot water storage --1.5 Ltr.

Dimensions of Dispenser: H x W x D (mm): 1055 x 390 x 390 (without extra jar)
GR. WT. (Kg.): 26 (with RO system & empty extra jar)
Height of extra jar: 240 mm. (Storage capacity of Jar = 8 Ltrs.)
Dimensions of 4-Gallon Storage Tank: H x W x D (mm): 400 x 260 x 260
On left or right side of Water Dispenser shall place 4-Gallon tank, so the ground area required placing Dispenser and Tank = 390 + 260 = 650 mm, with a clearance of at least 8 inches on left, right, back and top. Front side shall remain open able for the purpose of servicing.

Required Inputs For Installation:

1. Water Inlet: Feed water terminal with inlet pressure = 0.8 to 2 Kg/cm2
2. Drain Pipe: For the disposal of reject water from RO System.
3. Electric Supply: AC ~ 230 V / 50 Hz.